Công bố khoa học

Bài báo ISI/Scopus
Danh sách các bài tạp chí ISI/SCOPUS (Journal papers indexed in ISI/SCOPUS):
2023 (26 bài báo) 2022 (16 bài báo) 2021 (21 bài báo) 2020 (20 bài báo) 2019 (8 bài báo)
++++++++
Danh sách các bài hội nghị ISI/SCOPUS (Conference/proceedings papers indexed in ISI/SCOPUS)
2022 (02 bài báo) 2021 (06 bài báo) 2020 (04 bài báo)
(In đậm/Bold: Tác giả thuộc Khoa KT ô tô & năng lượng/Author(s) affiliated with VEE)
(*: tác giả liên hệ/Corresponding author(s))
***********************************************************************************************************************
|
|
![]() |
80. Hoe D. Nguyen, Truong V. Vu, Nang X. Ho, Phan H. Nguyen, Anh D. Le, "Thermocapillary migration of a compound droplet on a substrate" European Journal of Mechanics, B/Fluids. |
![]() |
79. Hoe D. Nguyen, Truong V. Vu, Nang X. Ho, "Impact of Two Successive Compound Droplets Undergoing Thermal Convection" Iranian Journal of Science and Technology - Transactions of Mechanical Engineering. |
![]() |
78. Nang X. Ho, Truong V. Vu, "Numerical study of head-on collision of two equal-sized compound droplets" Physics of Fluids. |
![]() |
77. A.D. Le, T.V. Vu, T.C. Dinh, "Cavitation Flows Past a Rotating Circular Cylinder" Journal of Fluids Engineering, Transactions of the ASME. [JFE; Q2; ***IF: 1.998***; ] |
![]() |
76. Tien Nguyen Duy, Yen-Lien T. Nguyen, Truc Nguyen the, Khanh Nguyen Duc, Vinh Nguyen Duy, Toan Nguyen Duc, "Performance and emission of a converted bio-fuel motorcycle engine in cold condition: A case study" Energy Sources, Part A: Recovery, Utilization and Environmental Effects. |
![]() |
75. Viet Long Doan, Ba-Quang-Vinh Nguyen, Hung T. Pham, Chi Cong Nguyen, Cuong Tien Nguyen, "Effect of time-variant NDVI on landside susceptibility: A case study in Quang Ngai province, Vietnam" Open Geosciences. |
![]() |
74. Minh Phuong Nguyen, Anh Son Le, Hoang Hiep Ly, Anh Trung Tran, Xuan Nang Ho, "Optimization of Autonomous Bus Management System: A Case Study in Hanoi" Lecture Notes in Mechanical Engineering. |
![]() |
73. Khanh Duong Tran, Thanh Nam Phan, Anh Son Le, Xuan Nang Ho, "A Novel of Improving the Accuracy of High-Definition Map for Autonomous Vehicle: A Realistic Case Study in Hanoi Area" Lecture Notes in Mechanical Engineering. |
![]() |
72. Trong Duong Trinh, Kieu Vu Cao, Anh Son Le, Trung Kien Nguyen, Thi Lien Vu, Hoang Son Pham, Xuan Nang Ho, "A Novel of Applying Numerical Approach for Centre Computing Unit’s Cooling System" Lecture Notes in Networks and Systems. |
![]() |
71. Nang X. Ho, Truong V. Vu, "Solidification of A Liquid Drop Enclosing A Bubble on an Inclined Surface" European Journal of Mechanics, B/Fluids. |
![]() |
70. Ngoc Nghia Tran, Anh Son Le, Xuan Nang Ho, "Developments of an Suspension System and a Frame for Autonomous Mobile Robots" Lecture Notes in Networks and Systems. [https://doi.org/10.1007/978-3-031-62238-0_37; Scopus; ] |
![]() |
69. Quoc Dat Do, Anh Son Le, Xuan Nang Ho, Hoang Hiep Ly, "A Study on Object Recognition for Autonomous Mobile Robot’s Safety Using Multiple Sensors" Lecture Notes in Mechanical Engineering. |
![]() |
68. Dien Minh Vu, Binh Hoa Pham, Duc Pham Xuan*, Dung Nguyen Dinh** and Vinh Nguyen Duy, "Effect of Temperature and Humidity on the Performance Factors of a 15-W Proton Exchange Membrane Fuel Cell" Applied Chemistry for Engineering. |
![]() |
67. Kieu Vu Cao, Anh Son Le, Xuan Nang Ho, Tien Cuong Nguyen, Hoang Son Pham, "Effect of Oil Flow and Pipeline Layout on the Surface Temperature Uniformity of Heating Plate in Artificial Quartz Stone Curing System" Lecture Notes in Mechanical Engineering. |
![]() |
66. Duong Trinh Trong, Vu Kieu Cao, Son Le Anh, Kien Nguyen Trung, Lien Vu Thi, Son Pham Hoang, Nang Ho Xuan, "A NOVEL OF APPLYING NUMERICAL APPROACH FOR CENTRE COMPUTING UNIT’S COOLING SYSTEM " Lecture Notes in Mechanical Engineering. [Scopus; ] |
![]() |
65. Hoang Thi Thanh Thuy, Nang Xuan Ho, Vinh Nguyen Duy, Thuy Cao Thi, Tuan Pham Anh, Perla Morales-Gil, Manuel Palomar-Pardave, Nguyen Van Hieu, Thi-Xuan Chu, Tu Le Manh, "Electrochemical synthesis and characterization of high-purity cobalt nanostructures from CoCl2·6H2O dissolved in ethylene glycol-based nonaqueous solutions" Journal of Solid State Electrochemistry. |
|
64. T. V. Vu*, “A numerical investigation of a liquid bridge solidifying with volume change,” International Journal of Heat and Mass Transfer, 2021 (SCIE, IF2020 = 5.584, TCN+Q1) |
![]() |
63. Truong V. Vu*, and Nang X. Ho*, "Numerical study of a hollow pileup yielded by deposition of successive hollow droplets, " Physics of Fluids, 2022 (SCIE, IF2021 = 4.980, R1+Q1) |
62. Minh, T.N., Minh, H.P., Duy, V.N.*, "A review of internal combustion engines powered by renewable energy based on ethanol fuel and HCCI technology," AIMS Energy, 10(5), pp. 1005-1025 (2022) (Scopus, Q3) |
|
|
61. H.V. Vu, T. V. Vu*, B.D. Pham, H.D. Nguyen, V.T. Nguyen, H.T. Phan, C.T. Nguyen, "Deformation of a compound droplet in the wavy constricted channel," Journal of Mechanical Science and Technology, 2022 (SCIE, IF2021 = 1.81, Q2) |
|
60. Binh D. Pham, T. V. Vu*, “A numerical study of a suspended compound droplet solidifying under forced convection,” International Journal of Heat and Mass Transfer, 2021 (SCIE, IF2020 = 5.584, TCN+Q1) |
![]() |
59. V. T. Nguyen, Truong V. Vu*, Phan H. Nguyen, Binh D. Pham, Hoe D. Nguyen, Hoa T. Phan & Hung V. Vu, "Marangoni Motion of a Droplet in a Constriction, " Microgravity Science and Technology, 2022 (SCIE, IF2020=1.982, Q1-R5) |
![]() |
58. Manh Long Nguyen*, Thi Thu Huong Tran*, Tuan Anh Nguyen, Duc Ngoc Nguyen, Ngoc Duyen Dang, "Application of MIMO Control Algorithm for Active Suspension System: A New Model with 5 State Variables, " Latin American Journal of Solids and Structures, 2022 (SCIE, IF2020=1.481, Q2) |
![]() |
57. Thanh D. Xuan,Dien V. Minh,Binh P. Hoa,Khanh N. Duc, Vinh N. Duy*, "Influence of ethanol-gasoline blended fuel on performance and emission characteristics of the test motorcycle engine, " Journal of the Air and Waste Management Association, 2022 (SCIE, IF2020 = 2.235, R2+Q2) |
![]() |
56. Truong V. Vu*, Hiep V. Nguyen, and Nang X. Ho*, "A numerical study of the coalescence of hollow droplets under solidification, " Physics of Fluids, 2022 (SCIE, IF2020 = 3.521, R1+Q1) |
![]() |
55. Hoe D. Nguyen, Truong V. Vu*, Phan H. Nguyen, Binh D. Pham, Vinh T. Nguyen, Hung V. Vu, Cuong T. Nguyen, Duong K. Tran, "A numerical study of an impacting compound droplet undergoing thermocapillary convection" Acta Mechanica, 2022 (SCIE, IF2020 = 2.698, Q1-R2) |
![]() |
55. Nguyen, D.K.*, Bui, T.T.H., Tran, T.T.H., Alexandrov, S., "Large deflections of functionally graded sandwich beams with influence of homogenization schemes" Archive of Applied Mechanics, 2022 (SCIE, IF2020 = 1.976, Q2-R4) |
![]() |
54. Le, A.S.*, Xuan, N.H., Aoki, H., "Assessment of senior drivers’ internal state in the event of simulated unexpected vehicle motion based on near-infrared spectroscopy" Traffic Injury Prevention, 2022 (SCIE, IF2020 = 1.491, Q2-R1) |
![]() |
53. V.T. Nguyen, Truong V. Vu*, P. Nguyen, H. Nguyen, B. Pham, H.Vu, "A Compound Droplet Undergoing Thermocapillary Migration Passing Through a Constricted Tube" Journal of Fluids Engineering, 2022 (SCIE, IF2020 = 1.995, Q2-R4) |
![]() |
52. Kien. Nguyen Trung*, Quy. Nguyen Trong, "The cylinder liner temperature distribution evaluation of a diesel engine operating with M10, E10, and B10 fuels" International Journal of Heat and Technology, 2022 (Scopus) |
![]() |
51. Truong V. Vu*, Binh D. Pham, Hung V. Vu, and Nang X. Ho*, "Solidification of a hollow sessile droplet under forced convection, " Physics of Fluids, 2022 (SCIE, IF2020 = 3.521, R1+Q1) |
![]() |
50. Tran, Q.D.*, Tran, T.T., Nguyen Duy, V*, "An experimental investigation on performance of converted CNG engine by varying piston bowl geometry: A case study, " Journal of the Air and Waste Management Association, 2022 (SCIE, IF2020 = 2.235, R2+Q2) |
2021 (21) |
|
49. Truong V. Vu*, Binh D. Pham, Phuc H. Pham, Hung V. Vu, and Bo X. Tran, "A numerical study of hollow water drop breakup during freezing, " Physics of Fluids, 2021 (SCIE, IF2020 = 3.521, R1+Q1) |
|
|
48. Vinh Nguyen Duy, Khanh Nguyen Duc*, Nguyen Cam Van, "Real-time driving cycle measurements of fuel consumption and pollutant emissions of a bi-fuel LPG-gasoline motorcycle," Energy Conversion and Management: X, 2021 (SCOPUS, R9+Q1) |
47. Quang K. Nguyen*, Galina M. Kuz’micheva*, Evgeny V. Khramov, Roman D. Svetogorov, Ratibor G. Chumakov, Thuy T. Cao, “Design of metal-organic polymers MIL-53 (M3+). Preparation and characterization of MIL-53 (Fe) and graphene oxide composite,” Crystals, 2021 (SCIE, IF2020 = 2.589, Q2) | |
46. Duc Tran Duy, Vinh Nguyen Duy*, Thuy Cao Thi, Nang Xuan Ho, Hoa Binh Pham, “Anode and Cathode Flow Field Design and Optimization of Parametric Performance of PEMFC,” International Journal of Electrochemical Science, 2021 (SCIE, IF2020 = 1.765, Q3) | |
45. Thuy T.Cao*, H. Yabu, Do S.Huh*, “Flower-like ordered porous array by combination of breath figure and layer-by-layer technique,” Polymer, 2021 (SCIE, IF2020 = 4.43, R1+Q1) | |
|
44. T. V. Vu*, “Three-phase solidification of a liquid compound droplet on a curved surface,” International Journal of Heat and Mass Transfer, 2021 (SCIE, IF2020 = 5.584, TCN+Q1) |
|
43. Thanh-Trung Vo, Cuong T. Nguyen*, "Characteristics of force transmission in cohesive agglomerates impacting a rigid surface", Mechanics Research Communications, 2021 (SCIE, IF2020 = 2.254, Q1) |
|
42. Dang T. Bui, H.V. Vu, Quang D. Nguyen, T.V. Vu*, "A multi-core compound droplet passing through a diffuser channel", Journal of Mechanical Science and Technology, 2021 (SCIE, IF2020 = 1.734, Q2) |
|
41. V.T. Nguyen, T.V. Vu*, P.H. Nguyen, N.X. Ho, B.D. Pham, H.D. Nguyen, H.V. Vu, "Thermocapillary Migration of a Fluid Compound Droplet", Journal of Mechanical Science and Technology, 2021 (SCIE, IF2019 = 1.345, Q2) |
40. Thanh-Trung Vo, Cuong T. Nguyen, Trung-Kien Nguyen, Van My Nguyen, Thi Lo Vu : "Impact dynamics and power-law scaling behavior of wet agglomerates", Computational Particle Mechanics, 2021 (SCIE, IF2019 = 1.696, Q2) |
|
39. Kien.Nguyen Trung*, "Effect of heat transfer correlation on wet cylinder liner temperature distribution when converting an old engine into a turbocharged engine", Archives of Thermodynamics, 2021 (Scopus, Q3). |
|
|
38. Kien.Nguyen Trung*, "JTEN-2020-212: The Temperature Dıstrıbutıon Of The Wet Cylınder Lıner Of V-12 Engıne Accordıng To Calculatıon And Experıment", Journal of Thermal Engineering, 2021 (Scopus, Q3). |
|
37. B.D. Pham, T.V. Vu*, L.V.T. Nguyen, N.X. Ho*, C.T. Nguyen, H.D. Nguyen, V.T. Nguyen, H.V. Vu, "A numerical study of geometrical effects on solidification of a compound droplet on a cold flat surface", Acta Mechanica 2021 (SCIE, IF2019 = 2.102, Q1). |
|
36. Nguyen Trung Kien*, Hoang Tuan Hai, "Effects of ethanol port injection timing and delivery rate on combustion characteristic of a heavy-duty V12 diesel engine", Thermal Science, 2021 (SCIE, IF2019 = 1.574, Q3). |
|
35.A Haghighi, MR Pakatchian, MEH Assad, VN Duy* & MA Nazari “A review on geothermal Organic Rankine cycles: modeling and optimization", Journal of Thermal Analysis and Calorimetry, 2020 (SCIE, IF2019 = 2.731, Q3). |
|
34.CT Nguyen, HV Vu, TV Vu*, TV Truong, NX Ho*, BD Pham, HD Nguyen, VT Nguyen “ Numerical analysis of deformation and breakup of a compound droplet in microchannels", European Journal of Mechanics - B/Fluids, 2021(SCIE, IF2019 = 2.131, Q2) |
|
33. Doan Nguyen Cong, Khanh Nguyen Duc* , Vinh Nguyen “ The effects of dimethyl ether enriched air (DMEA) on exhaust pollutants and performance characteristics of an old generation diesel engine ", International Journal of Sustainable Engineering, 2021 (Scopus, Q1). |
32. Nang X. Ho, Truong V. Vu*, Vinh T. Nguyen, Cuong T. Nguyen*, and Hung V. Vu, A numerical study of liquid compound filament contraction, Physics of Fluids, 2021 (SCI, IF2019 = 3.514, R1+Q1) | |
|
31. Hoe D. Nguyen, Truong V. Vu*, Phan H. Nguyen, Binh D. Pham, Nang X. Ho*, Cuong T. Nguyen, Vinh T. Nguyen, Numerical study of the indentation formation of a compound drops in a constriction, Journal of Mechanical Science and Technology, 2021 ( SCIE, IF2019 = 1.345, Q2) |
|
30. N. X. Ho, T. V. Vu* and B. D. Pham, “A numerical study of a compound liquid drop solidifying on a horizontal surface,” International Journal of Heat and Mass Transfer, 2021 (SCI, IF2019 = 4.947, TCN+Q1) |
|
29. Yen-Lien T. Nguyen, Anh-Tuan Le, Khanh Nguyen Duc , Vinh Nguyen Duy & Cong Doan Nguyen “ A study on emission and fuel consumption of motorcycles in idle mode and the impacts on air quality in Hanoi, Vietnam ", International Journal of Urban Sciences, 2021 (SCIE, IF2019 = 1.831, Q3). |
|
2020 (20) |
|
28. Minh Quang Chau, Danh Chan Nguyen, Anh Tuan Hoang, Quang Vinh Tran, Van Viet Pham, A Numeral Simulation Determining Optimal Ignition Timing Advance of SI Engines Using 2.5-Dimethylfuran-Gasoline Blends, International Journal on Advanced Science, Engineering and Information Technology, 2020 (SCOPUS) |
|
27. Danh Chan Nguyen, Anh Tuan Hoang, Quang Vinh Tran, Hadiyanto Hadiyanto, Kanit Wattanavichien, Van Viet Pham, A comparison review on the performance, combustion, emission and spray characteristics of DMF with ethanol and gasoline for SI engine application, Journal of Energy Resources Technology, 2020 (SCIE, IF2019 = 3.183, Q1) |
|
26. Cuong T. Nguyen*, Thao P. Trinh, Truong V. Vu. "SET UP RAINFALL-RUNOFF MODELS FOR FORECASTING INFLOW OF BAN-CHAT RESERVOIR VIETNAM." Journal of Critical Reviews (2020, SCOPUS) |
|
25. N. X. Ho, H. B. Pham, V. N. Duy*, “Experimental study on characteristics of the test engine fueled by biodiesel based Jatropha oil and traditional diesel", AIMS Energy 2020 (SCOPUS, Q3). |
|
24. T. D. Nguyen, T. T. Anh*, V. T. Quang, H. B. Nhat and V. N. Duy*, “An experimental evaluation of engine performance and emissions characteristics of a modified direct injection diesel engine operated in RCCI mode", AIMS Energy 2020 (SCOPUS, Q3). |
|
23. N. X. Ho, T. V. Vu*, “Numerical simulation of the deformation and breakup of a twocore compound droplet in an axisymmetric T-junction channel", International Journal of Heat and Fluid Flow, 2020 (SCIE, IF2018 = 2.0, R1+Q1). |
|
22. Danh Chan Nguyen, Anh Tuan Hoang, Quang Vinh Tran, Hadiyanto Hadiyanto, Kanit Wattanavichien, Van Viet Pham, "A review on the performance, combustion and emission characteristics of SI engine fueled with 2,5-Dimethylfuran (DMF) compared to ethanol and gasoline," Journal of Energy Resources Technology, 1-87 (2020) (SCIE, IF2019 = 3.183, Q1) |
|
21. H. X. Nguyen, N. Viet Dung, K. Duc, D. D. Nguyen, V. N. Duy*, "Numerical analysis of the forces on the components of the V-12 engine type retrofitted in transportation vehicle," Energy Sources, Part A: Recovery, Utilization and Environmental Effects (2020) (SCIE, IF2018 = 0.894, Q3) |
|
20. T. V. Vu*, D. T. Bui, D. Q. Nguyen, P. H. Pham, “Numerical study of rheological behaviors of a compound droplet in a conical nozzle,” International Journal of Heat and Fluid Flow, 2020 (SCI, IF2018 = 2.0, R1+Q1) |
|
19. D. N. Cao, A. T. Hoang*, H. Q. Luu, V. G. Bui,T. T. H. Tran, "Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition," Energy Sources, Part A: Recovery, Utilization and Environmental Effects (2020) (SCIE, IF2018 = 0.894, Q3)
|
|
18. V. N. Duy, K. N. Duc*,T. N. Thanh, L. H. Dinh, T. L. Anh, "Implementation of fuel additive maz 100 for performance enhancement of compressed natural gas engine converted from in-used gasoline engine" Journal of the Air & Waste Management Association (2020) (SCIE, IF2018=1.858, Q2)
|
|
17. Vinh Duy Nguyen, Hyung-Man Kim* “A Study of the Movement, Structural Stability, and Electrical Performance for Harvesting Ocean Kinetic Energy Based on IPMC Material", Processes 2020, 8(6), 641 (SCIE, IF2018 = 1.963, Q2). |
|
16. Hoi Nguyen Xa, Thanh Nguyen Viet, Khanh Nguyen Duc, Vinh Nguyen Duy* (2020)“Utilization of Waste Cooking Oil via Recycling as Biofuel for Diesel Engines”, Recycling, 2020 (Scopus, Q2) |
|
15. Thanh Viet Nguyen, Khanh Duc Nguyen, Nang Xuan Ho, Vinh Duy Nguyen* “Engine performance and combustion characteristics of a direct injection compression ignition engine fueled waste cooking oil synthetic diesel", International Journal of Coal Science & Technology, 2020 (Scopus, Q1). |
|
14. Khanh P. Nguyen, T. V. Vu*, “Collision Modes of Two Eccentric Compound Droplets", Processes ,Vol. 8 (5), pp. 602, 2020 (SCIE, IF2018 = 1.963, Q2) |
|
13. Vinh Nguyen Duy, Hyung-Man Kim*, "Review on the Hybrid-Electric Propulsion System and Renewables and Energy Storage for Unmanned Aerial Vehicles" International Journal of Electrochemcal Science, Vol. 15, pp. 5296 – 5319, 2020 (SCIE, IF2018 = 1.28, Q3).
|
|
12. Thanh Dinh,Khanh Nguyen,Tuan Pham, Vinh Nguyen*, "Study on performance enhancement and emission reduction of used carburetor motorcycles fueled by flex-fuel gasoline-ethanol blends," Journal of the Chinese Institute of Engineers, pp. 1-12, 2020 (SCIE, IF2018 = 0.651, Q2) |
|
11. T. V. Vu*, “Numerical study of solidification of a drop with a growth angle difference,” International Journal of Heat and Fluid Flow, 2020 (SCI, IF2018 = 2.0, R1+Q1) |
|
10. Binh D. Pham*, T. V. Vu*, Cuong T. Nguyen, Hoe D. Nguyen, Vinh T. Nguyen, “Numerical Study of Collision Modes of Multi-core Compound Droplets in Simple Shear Flow,” Journal of Mechanical Science and Technology, Vol. 34 (5), pp. 2055-206, 2020 (SCIE, IF2018 = 1.221, Q2) |
|
9. T. V. Vu*, P. H. Pham, “Numerical study of a compound droplet moving toward a rigid wall in an axisymmetric channel,” International Journal of Heat and Fluid Flow, Vol. 82, pp. 108542, Jan. 2020 (SCI, IF2018 = 2.0, R1+Q1) |
|
2019 (8) |
|
8. K. D. Bhagat, T. V. Vu*, J. C. Wells*, "Formation and breakup of an immiscible compound jet with density or viscosity stratification," Applied Sciences, Nov. 2019 (SCIE, IF2018=2.217, Q1) |
|
7. T. V. Vu*, “Parametric study of the collision modes of compound droplets in simple shear flow,” International Journal of Heat and Fluid Flow, Vol. 7, pp. 108470, Dec. 2019 (SCI, IF2018 = 2.0, R1+Q1) |
|
6. T. V. Vu*, C. T. Nguyen and Q. H. Luu, “Numerical study of a liquid drop on an inclined surface with solidification,” International Journal of Heat and Mass Transfer, vol. 144, p. 118636, Dec. 2019 (SCI, IF2018 = 4.346, TCN+Q1) |
|
5. T. V. Vu* and Q. H. Luu, “Containerless solidification of a droplet under forced convection,” International Journal of Heat and Mass Transfer, vol. 143, p. 118498, Nov. 2019 (SCI, IF2018 = 4.346, TCN+Q1) |
|
4. Danh Chan Nguyen*, Van Huong Dong, Quang Vinh Tran, "COMBUSTION CHARACTERISTICS OF SI ENGINE FUELED WITH 2,5- DIMETHYLFURAN AND GASOLINE BLENDS USING AVL-BOOST SIMULATION," Journal of Mechanical Engineering Research and Developments (JMERD), vol. 42, p. 34-37, Aug. 2019 (SCOPUS) |
|
3. V. N. Duy, K. N. Duc*, D. N. Cong, H. N. Xa, and T. Le Anh, “Experimental study on improving performance and emission characteristics of used motorcycle fueled with ethanol by exhaust gas heating transfer system,” Energy for Sustainable Development, vol. 51, pp. 56–62, Aug. 2019 (SCIE, IF2017 = 2.658, Q1). |
|
2. K. D. Bhagat, T. V. Vu*, J. C. Wells, H. Takakura, Y. Kawano, and F. Ogawa, “Production of hollow germanium alloy quasi-spheres through a coaxial nozzle,” Jpn. J. Appl. Phys., vol. 58, no. 6, p. 068001, May 2019 (SCI, IF2017 = 1.452, Q2). |
|
1. K. Nguyen Duc, V. Nguyen Duy*, L. Hoang-Dinh, T. Nguyen Viet, and T. Le-Anh, “Performance and emission characteristics of a port fuel injected, spark ignition engine fueled by compressed natural gas,” Sustainable Energy Technologies and Assessments, vol. 31, pp. 383–389, Feb. 2019 (SCOPUS (ESCI), CiteScore 2017 = 3.79, Energy Engineering and Power Technology: 22 of 192, Q1). |
|
2022 (2) |
![]() |
Tuan Pham Minh, Dung Nguyen Manh, Vinh Tran Quang, Nguyen The Luong, Truc Nguyen The, Nguyen Duy Tien & Khanh Nguyen Duc, "The Pollutant Reduction Potential of Old Generation Diesel Engine Retrofitting After-Treatment System", The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering pp 586–596 |
![]() |
Nguyen Khong Van, Vu Le Anh, Thoan Tran Van, Trung Tran Anh & Vu Nguyen Hoang, "Real-Time Modeling of a Biodiesel B20 Fuelled CRDI Engine" Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021) pp 219–224. |
|
2021 (6) |
![]() |
Cuong T. Nguyen*, Truong V. Vu, Phuong T. T. Phan, Long V. Doan, Cong C. Nguyen, Son T. Hoang, "Spatial decision support system for real-time salinity control in Vu Gia-Thu Bon river system" THE 1ST INTERNATIONAL CONFERENCE ON INNOVATIONS FOR COMPUTING, ENGINEERING AND MATERIALS, 2021: ICEM, 2021. |
![]() |
Canh V. Doan, Cuong T. Nguyen*, Truong V. Vu, Vinh D. Nguyen, Phuong T. T. Phan, "Aerodynamic characteristics calculation and shape design optimization of a prototype vehicle" THE 1ST INTERNATIONAL CONFERENCE ON INNOVATIONS FOR COMPUTING, ENGINEERING AND MATERIALS, 2021: ICEM, 2021. |
|
Nang Xuan Ho, Tuan Anh Pham, Huong Thu Ha, Thuc Quang Dong, Nam Hoai Nguyen, Dieu Vinh Tran, "Enhancement of UV Resistance and Thermal Stability of the Unsaturated Polyester Material by Introducing MHHPA Fragment into the Molecular Skeleton" Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), 2021. |
|
Nang Xuan Ho, Le Anh Son, "Unmanned Ground Robot for COVID-19 Isolated Area in Vietnam" Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), 2021. |
Nang Xuan Ho, Duy Vinh Nguyen*, "Experimental analysis of the performance characteristics of the regenerative fuel cell system based on serpentine flow-field design" IOP Conference Series: Materials Science and Engineering, 2021. |
|
Kien.Nguyen Trung, A Study for Determination of the Pressure Ratio of the V12 Diesel Engine Based on the Heat Flow Density to Cooling Water, Lecture Notes in Networks and Systems , 2021 |
|
2020 (4) |
|
Thi Diep Tran, Duc Ha Vu, Shoudao Huan and Duy Vinh Nguyen, "Various Flow-Field Designs for Enhancing Fuel the Cell Performance of Proton Exchange Membrane Fuel Cells," IOP Conf. Ser.: Mater. Sci. Eng. 739 012012 |
|
|
Dinh Xuan Thanh, Thanh Viet Nguyen, Dien Vu Minh, Khanh Duc Nguyen and Vinh Nguyen Duy, "Engine Performance Characteristics of a Compression Ignition Engine Fuelled by Traditional Diesel and Waste Cooking Oil," IOP Conf. Ser.: Mater. Sci. Eng. 739 012011 |
V. Nguyen Duy, K. Nguyen Duc, H. Nguyen Tien, D. Vu Minh, “New Fuel System Design for Original Gasoline Motorcycles to Fuel by Ethanol,” IOP Conference Series: Materials Science and Engineering (MSE), In press (SCOPUS). |
|
H. Duc Vu, H. Shoudao Huang, D. Thi Tran, V. Nguyen Duy, “Design of L1 Adaptive Control for PMSG Wind Turbine System,” IOP Conference Series: Materials Science and Engineering (MSE), 507 012019 (SCOPUS). |